 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBR6045WT SWITCHMODEt Power Rectifier The SWITCHMODE power rectifier employs the use of the Schottky Barrier principle with a Platinum barrier metal. Features http://onsemi.com * Dual Diode Construction; Terminals 1 and 3 May Be Connected for * * * * * Parallel Operation at Full Rating 45 V Blocking Voltage Low Forward Voltage Drop Guard-ring for Stress Protection and High dv/dt Capability (> 10 V/ns) 175C Operating Junction Temperature Pb-Free Package is Available* SCHOTTKY BARRIER RECTIFIER 60 AMPERES, 45 VOLTS 1 2, 4 3 Mechanical Characteristics * Case: Epoxy, Molded * Weight: 4.3 Grams (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds 1 Symbol VRRM VRWM VR IF(AV) Max 45 Unit V Leads are Readily Solderable MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Per Diode (Rated VR, TC = 125C) Per Device Peak Repetitive Forward Current, (Rated VR, Square Wave, 20 kHz, TC = 90C) Per Diode Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Peak Repetitive Reverse Current (2.0 ms, 1.0 kHz) Storage Temperature Range Operating Junction Temperature (Note 1) Peak Surge Junction Temperature (Forward Current Applied) 2 3 TO-247 CASE 340L STYLE 2 MARKING DIAGRAM A 30 60 60 A MBR6045WT AYWWG IFRM IFSM 500 A IRRM Tstg TJ TJ(pk) 2.0 -65 to +175 -65 to +175 175 A C C C A Y WW G = Assembly Location = Year = Work Week = Pb-Free Package Voltage Rate of Change dv/dt 10,000 V/ms Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ < 1/RqJA. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ORDERING INFORMATION Device MBR6045WT MBR6045WTG Package TO-247 TO-247 (Pb-Free) Shipping 30 Units/Rail 30 Units/Rail (c) Semiconductor Components Industries, LLC, 2010 March, 2010 - Rev. 9 1 Publication Order Number: MBR6045WT/D MBR6045WT THERMAL CHARACTERISTICS (Per Diode) Rating Thermal Resistance, Junction-to-Case Symbol RqJC Max 1.0 Unit C/W ELECTRICAL CHARACTERISTICS (Per Diode) Instantaneous Forward Voltage (Note 2) @ IF = 30 Amps, TC = 25C @ IF = 30 Amps, TC = 125C @ IF = 60 Amps, TC = 25C Instantaneous Reverse Current (Note 2) @ Rated DC Voltage, TC = 25C @ Rated DC Voltage, TC = 100C 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle < 2.0% VF Volts 0.62 0.55 0.75 mA 1.0 50 IR TYPICAL ELECTRICAL CHARACTERISTICS 1000 I R, REVERSE CURRENT (mA) 100 TC = 150C 10 TC = 100C 1 i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 10 0.1 TC = 25C 150C 1 100C TC = 25C 800 0.01 0 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS) 50 100 200 300 400 500 600 700 vF, INSTANTANEOUS FORWARD VOLTAGE (mV) Figure 1. Typical Reverse Current Figure 2. Typical Forward Voltage http://onsemi.com 2 MBR6045WT PACKAGE DIMENSIONS TO-247 CASE 340L-02 ISSUE E -T- -B- U L 4 C E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. DIM A B C D E F G H J K L N P Q U W MILLIMETERS MIN MAX 20.32 21.08 15.75 16.26 4.70 5.30 1.00 1.40 1.90 2.60 1.65 2.13 5.45 BSC 1.50 2.49 0.40 0.80 19.81 20.83 5.40 6.20 4.32 5.49 --4.50 3.55 3.65 6.15 BSC 2.87 3.12 ANODE CATHODE (S) ANODE 2 CATHODES (S) INCHES MIN MAX 0.800 8.30 0.620 0.640 0.185 0.209 0.040 0.055 0.075 0.102 0.065 0.084 0.215 BSC 0.059 0.098 0.016 0.031 0.780 0.820 0.212 0.244 0.170 0.216 --0.177 0.140 0.144 0.242 BSC 0.113 0.123 N A 1 2 3 -Q- 0.63 (0.025) P -Y- M TB M K F 2 PL W D 3 PL 0.25 (0.010) G J H M YQ S STYLE 2: PIN 1. 2. 3. 4. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 3 MBR6045WT/D |
Price & Availability of MBR6045WT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |